Continuous Band Sealing: Bag Details to Confirm Before Testing
A continuous band sealer takes the open edge of a filled bag through heated belts while a conveyor supports the pack. To choose a machine and set up a useful trial, send the actual bag and product. An empty pouch can seal cleanly on the bench, while the same pouch can wrinkle or leak when the filled pack pulls on its mouth.
Confirm what must bond at the bag mouth
Send the bag supplier's film specification if you have it. Identify the heat-seal layer, film thickness per wall and any recommended sealing conditions from the supplier. For a laminated kraft or foil pouch, the inner layer at the seal matters. Mark any gussets or folds that create extra layers across the intended seal. A thick edge can seal differently from a flat section of the same bag.
On a sample or drawing, mark the required seal width and distance from the top edge. Show any zipper, tear notch or printed area near the seal. Measure the clear height available above the filled product and check that the operator can feed the mouth straight without trapping powder, crumbs or liquid in the seal.
Choose the conveyor orientation using filled bags
Check the width and height of the bag, its maximum filled weight, and the way it rests on the belt. For a product that stays in position while the bag lies flat, test horizontal feeding. If the product shifts toward the mouth or spills when tilted, test upright feeding and confirm that the conveyor supports the base without pulling the seal edge through the belts. Try your shortest and tallest bag formats if the machine will handle several sizes.
See the LTPK continuous band sealer range for machine configurations. If the same station must print a batch code, compare the W-1600 continuous band sealer with inkjet printing and mark the print location on your sample. For fragile puffed snacks that need inflation before sealing, the LT-DBF1000 gas-inflating band sealer is an option to evaluate with your pack.
Agree on the seal test before the trial
- Bring enough production bags and product for setup and a run of consecutive filled packs. Include the bag format with the thickest folds and the heaviest filled pack if they differ.
- Record the temperature setting and belt speed for each run. If the seal is weak or distorted, change one setting at a time and compare cooled samples.
- Inspect both ends and the center of the seal for wrinkles, gaps and trapped product. Agree in advance on the leak or seal-strength check appropriate for the pack and how it will be handled.
- Check accepted packs at the target run speed. If coding is required, also verify that the print is legible and stays clear of the seal and tear notch.
To arrange a trial, request a quote from LTPK with the bag material and dimensions, filled weight, seal position and target packs per minute. A photo of the bag upright and another of the open mouth can help the supplier assess the setup.