Date Coding on Packaging: Surface and Code Details to Prepare
A code that looks sharp on a spare label can smear on a chilled bottle or disappear against a dark pouch. Before choosing a date coder, show the supplier the finished package and mark the exact area where the code will go. Test that area under the conditions it will see in production.
Send the surface the coder will actually mark
Identify whether the code goes on a label, bare bottle, cap, carton or pouch. Send samples with the same coating, color and finish as production stock. On a pouch, point out seams, gussets and areas distorted by filling. On a bottle, mark the code position and show the curvature, any raised lettering and the clearance around it. Note whether the area will be cold, damp or dusty when it reaches the coder.
Use a photo or drawing to specify the usable print area in millimeters. Mark any artwork or fold the code must stay clear of. If packaging comes in several colors or finishes, include the option that gives the least contrast and the one you expect to be hardest to mark.
Provide an exact example of the code
Send the text as it should appear, including line breaks, spaces and separators. For example, show whether the code is two lines, such as “EXP 2027-05-18” and “LOT B042”, or one continuous string. State the minimum character height and specify which fields change by batch, date or individual pack. An example from your artwork is more useful than asking for “a date and a lot number”.
Tell the supplier when coding happens: on loose packaging before filling, on the label roll before application, or on the finished pack. For flexible packs marked one at a time, evaluate the DY-8 manual ribbon date coder on your own material. For variable codes applied to adhesive labels before application, consider the LT-GSP160 inkjet coding and rewinding system. If the code must go directly on a rigid pack, share the pack geometry and handling details when asking about an inline coder in the date coding machine range.
Check the mark when the trial is over
- Inspect several consecutive samples for missing characters, uneven spacing and placement inside the marked print area.
- Check legibility against the actual background under the light used for inspection. If the pack needs a machine-readable code, scan it using the intended reader.
- After the agreed drying or settling time, rub the mark as it would be handled during packing. Repeat after any relevant chilling or condensation exposure, using the same checks on each sample.
- Run the pack at its target speed and repeat after a stop and restart. Keep the accepted samples and record the settings and consumables used.
To request a date coding trial, share the packaging sample, code example, marked print area, production speed and the conditions the mark must withstand.